[adrotate banner="1"]

Water Quality MeterFest and Meter Maintenance

What is MeterFest?

As part of the certified lake monitoring process, Lake Stewards of Maine (LSM) and the Maine Department of Environmental Protection (DEP) provide free calibration and maintenance for volunteer water quality dissolved oxygen meters. The only potential cost is for replacement components, which we will discuss with you beforehand.

At MeterFest, LSM and DEP staff:

  • ✅ Inspect and test dissolved oxygen meters at no charge
  • ✅ Perform routine maintenance (when possible)
  • ✅ Evaluate equipment performance in a controlled lab setting

This service typically costs hundreds of dollars when done by a manufacturer or technician — but it’s free for you!

Save the Date MeterFest will be on April 15, 2027!

More information will be available this winter. If you have any questions, please reach out to stewards@lakestewardsme.org

Did you miss MeterFest this year?

Don’t worry, please reach out to stewards@lakestewardsme.org to schedule an alternative time to have your meter checked. It takes longer when not participating in MeterFest, but we want to make sure all DO monitors have the chance to have their meters inspected.

Drop-Off & Shipping Options

This year, we offer shipping to Augusta DEP or drop-off at six locations (please call ahead to ensure the office is open):

  • 📍 Auburn – LSM Office – Deadline 4/8
  • 📍 Augusta – DEP Office – Deadline 4/9
  • 📍 Bangor – Penobscot County Soil & Water Conservation District (SWCD) – Deadline 4/6
  • 📍 Portland – DEP Office – Deadline 3/22
  • 📍 Presque Isle – DEP Office – Deadline 3/22
  • 📍 Springvale – Penobscot County Soil & Water Conservation District (SWCD) – Deadline 4/6

Since this process takes time, we ask that you submit your meter for MeterFest and follow all steps in the MeterFest Checklist.

To download the PDF, simply click the button below.

Download

Properly Storing Your Equipment

Secchi Disc, Tape, and View Scope

  1. Clean and inspect: Rinse the Secchi disc, tape, and scope with clean water. Check the tape for fraying or tears and tighten the bolts on the disc and weight as needed. Avoid overtightening, which can crack the disc.
  2. Dry completely: Allow all equipment to air dry thoroughly before putting it away. If you clean the inside of your view scope, allow additional time for it to dry completely.
  3. Protect the view scope: Cover the opening of the scope with a plastic bag or similar covering to keep out dust, spiders, and mice. Make sure the scope is completely dry before covering it.
  4. Store in a protected location: Keep all Secchi equipment indoors in a dry, temperature-stable location, away from freezing temperatures, excessive heat, and physical damage.

Dissolved Oxygen (DO) Meters and Probes

  1. Remove batteries: Remove disposable batteries before storage to prevent corrosion and potential damage to the meter's internal electronics.
  2. Clean the probe: Follow your meter manufacturer's instructions for cleaning and preparing the probe. Storage requirements differ between polarographic and optical DO meters, so consult your owner's manual for instructions specific to your model.
  3. Prepare the probe for storage: Polarographic probes generally require removal of the membrane or membrane cap, rinsing with distilled water, and air drying before storage. Optical DO probes typically need to remain moist and must not be allowed to dry out. Follow the manufacturer's recommended storage method.
  4. Check periodically: If your probe requires moisture during storage, check it periodically throughout the off-season to ensure it has not dried out and that the appropriate moisture level is maintained.
  5. Protect the meter: Allow the meter and cables to dry thoroughly and store them in a sturdy, protected case in a dry location, away from excessive heat, dust, and physical impacts.

Always refer to your specific DO meter's owner's manual and manufacturer's recommendations for proper cleaning, winterization, and storage. Following the correct procedures for your particular model is important for protecting the probe and extending the life of your equipment.

Prefer to have LSM store your equipment? You're welcome to leave your Secchi equipment or DO meter with us for the winter. Contact us at stewards@lakestewardsme.org to arrange drop-off.

Scroll to Top

©2026 all content, unless otherwise specified, copyright by Lake Stewards of Maine.